How Can You View Crash Logs in Windows 10?

If somehow Windows gets crashed, frozen, or automatically rebooted, there is nothing to worry about. This crash may happen with any hardware driver or Windows bug. It usually happens when the Windows operating system shuts down suddenly.

When your computer crashes, a crash record is created that can assist you in determining the reason for the crash. Do you know how to view the crash and error logs in Windows 10? Do not worry if you do not know.

There are various methods by which you can view Windows crash logs using different techniques. You can use Event Viewer to look at Windows 10 crash logs. The built-in tool Event Viewer may be used to view Windows 10 crash logs. There are various other methods for Windows crash logs Windows 10. It keeps track of application and system messages, errors, warnings, and so on.

Also, read How To Setup 3 Monitors In Windows 10

What is the purpose of the Event Viewer?

The fundamental component of Windows 10 is the Event Viewer.  It houses the system messages, which include error, informative, and warning messages, among other things, and the Windows crash report logs program. The Event Viewer’s primary purpose is to help the user locate various issues and crashes on his machine.

Know about Windows 10 Crash Logs

You can follow these quick and straightforward methods to view Windows 10 crash logs on your PC.

Step 1: Configure your Windows 10 OS’s advanced system options

To resolve a problem in Windows 10, you will need to take a full screenshot of the event viewer. The first step to viewing the Windows 10 crash log is to set up your Windows 10 operating system’s advanced system options. To do this work, follow the simple steps below. You need to know how to check crash logs in Windows 10.

Control

1) Grasp your keyboard and simultaneously press the logo window key + R on your keyboard. The dialogue box will then appear on your screen. To open the control panel, type “Control” in the dialogue box and click Enter.

exploration box

2) In the upper-right corner, type advanced in the exploration box.

click View advanced system options

3) Then click View Advanced System Options.

Go to the Advanced page then to the Startup and Recovery section

3) Go to the Advanced page, then to the Startup and Recovery section, and finally to “Settings.”

in the System failure section adjust the settings. Finish the process and press OK

4) Now, in the System Failure section, adjust the settings. Finish the process and press OK, and you will be able to see the crash report Windows 10.

Must read: Which Is Better Windows 7 Or 10?

Step 2: Launch the Event Viewer

Launch the Event Viewer

To open Event Viewer, Type Event Viewer in the search box you will see an Event Viewer app pop up. You have two options for viewing information about a specific event from here. You can access information for the Windows 10 crash log from the left panel—view events from executive summary events.

event viewer

1) Look at the information in the left panel.

Double-click Windows Logs or System Crash Log in the left panel of Event Viewer to expand it. When you click System, all of his connected information will appear on the screen. Select an error from the list; a thorough description and information will appear at the bottom of the window.

2) Go to “Summary Administrative Events” and look at the errors.

summary administrative Events
  • You should select “Event Viewer local” from the left panel, then click on Summary of Administrative Events. To expand the critical event type, click the + button in front of it.
  • Select View All Instances of This Event from the context menu when you right-click the vital event record.
  • Select the error from the drop-down menu, and complete details will appear at the bottom of the window. This is where to find crash logs Windows 10.

Step 3: Make a unique view

Are you looking for a simple way to view specific sorts of logs? Don’t be concerned, as there are many methods to view the crash logs. You can see the crash logs more quickly by establishing a custom view. Here is how to make one:

Make a unique view
  • From the left panel, choose Event Viewer (Local). Select Create Custom View from the Actions section.
  • Now that the box has appeared in your screen window, click the downward arrow next to Logged to select a time range. To choose the event levels, check the boxes next to Critical, Warning, and Error.
  • Select the by-log option button to create a custom view based on a log to find crash reports Windows 10. To access the drop-down list, click the downward arrow next to Event Logs, then select Application, Security, or System. To continue, click OK.
  • In the popup box, give the custom view a name, and then click OK to begin seeing the crash reports. If you wish to see the custom view again, double-click the custom views button in the left panel. Then choose Crash Logs from the drop-down menu.

Step 4: Save the crash records to your computer

Save the crash records to your computer

The crash logs can also be exported for external diagnostics.

Select your events from the list, and then click Save Selected Events. You can very easily view the PC crash log. If a user wants to export specific circumstances, they can do it as follows. You can follow the below-mentioned steps

 to view crash logs in Windows 10:

If a user wants to export specific events, they can do it as follows:

1) Select the errors or Events that you would like to export. Right-click on the events you want to save, then select Save Selected Events.

2) Locate a spot where you can save this file. Give this file a name, and then keep it.

If the user wants to export a custom view, follow these steps:

1) In the left panel, double-click Custom Views, then select the custom view you want to export.

2) In the Action section, click Export Custom View.

3) You should select a location for the file to be saved. After that, you need to save the file with a new name.

After knowing these steps for finding the Windows 10 crash logs, you can now examine crash reports in Windows 10.

Things to consider for crash logs in Windows 10

Computers tend to crash and freeze. It’s possible that your Windows PC rebooted on its own. If that is the case, it most likely died from a blue screen of death while you weren’t looking. Finding more precise fault details is the first step in troubleshooting. The procedures you can go over should help you narrow down and pinpoint the source of your computer’s crashing or freezing issues.

The tools to remove the Windows 10 crash logs, for example, may point to a specific device driver. This could indicate a flaw in the device driver or a problem with the underlying hardware. In either case, it will provide you with a starting point for your search. There are also methods, on the other hand, for diagnosing a PC that can at least start Windows. Instead, if Windows—or your PC—won’t start, see our instructions on what to do when Windows doesn’t boot.

Take a look at the Reliability Monitor for Windows 10 crash logs

The Reliability Monitor is more valuable for providing you with an indication of when crashes or other significant events occurred, viewing what happened in the aftermath of such impacts, and starting to narrow down likely reasons. The Windows 10 crash logs should be regularly checked. If you are curious to know the crash logs at that very moment, the Reliability Monitor gets its information from the same event logs as the venerable Event Viewer. So, if you are more at ease with Event Viewer, you may contact the same results. If you see an event that looks intriguing, double-click it to bring up a details window with further details.

If you can see that the Windows you are using has starting problems because of a complex disc problem, you must check its crash logs. You can get some assistance by clicking the “Check for solutions to all problems” link at the bottom of the window. However, this feature is not that useful and rarely yields results. With these steps, you can very quickly locate the Windows 10 crash report location. In the best-case situation, it may be suggested that you update your hardware drivers. When Windows experiences a blue screen issue, it saves the memory files to a local file, providing vital information for debugging.

Follow the below steps to check Windows crash logs in Windows 10 with Event Viewer:

Step 1: In the Windows 10 Cortana search box, type Event Viewer. Then right-click the Event Viewer that best matches your needs and select Run as Administrator.

Step 2: This is the Event Viewer’s main interface. You can view all of the Logs by category on the left side of the window. Click on Windows Logs to examine Windows 10 crash logs, such as blue screen error logs.

Step 3: Next, go to Windows Logs and select System.

Step 4: In the event list, look for Error and click it for the computer crash report.

The processes for creating a custom view are outlined below.

You may also develop a custom display to make it easier to see the crash logs.

Procedure 1:

  1. On the right window, click Create a Custom View. Click Create Custom View and a new window will open then select the period for which you want to see the crash logs. Then, under the Event levels section, tick the boxes next to Critical, Warning, and Error.
  2. Select the By Log option from the drop-down menu. Then pick Application, Security, and System from the drop-down option next to Event logs.
  3. Finally, click OK to save the changes.
  4. You can give your custom view a name, and then click OK to begin viewing the Windows 10 crash report.
  5. Now you may see all of the Windows 10 crash records from the period you chose.
  6. You can also use Windows Reliability Monitor to see the current system and program crashes. Reliability Monitor can be used to check Windows 10 crash logs.

Procedure 2:

  1. Use Reliability Monitor to look at the Windows 10 crash log.
  2. In the Windows 10 Cortana search box, type reliability. Then select the most appropriate match. View the history of dependability to see the computer crash log.
  • The Reliability Monitor pane is organized by dates, as you can see from the main interface. A red circle with an “X” denoting the failure will appear if Windows crashes or freezes.
  • To read a specific day’s crash log, click the column for that day, and additional, comprehensive information will appear at the bottom. You can also open a new window with more details by double-clicking one of the listed events.

Conclusion

When users encounter various faults or program failures in Windows 10, the event viewer is the most effective tool for troubleshooting these issues. You need to know how to check computer crash logs. However, if you do not know how to inspect crash logs on Windows 10, don’t worry. There are a few basic steps with which you can find the Windows 10 crash log file location. You may check Windows 10 crash logs with Event Viewer and Reliability Monitor. Choose a tool that you like, and you will access all of the information from the Windows crash report.

FAQs

Where to find Windows crash logs?

To find Windows crash logs, you should look into the Control Panel> System and Security> Administrative Tools, and use Windows Event Viewer to investigate the crash. Select Event Viewer from the menu. You can also expand Windows Logs which is in the left pane and pick Application. Scroll down to the event’s date and time in the upper middle pane.

Where to find crash logs in Windows 10?

To find crash logs in Windows 10, press the Start button, type “reliability,” and then select the “View reliability history” shortcut. The Reliability Monitor pane is organized by date, with the most recent days represented by columns on the right. You can switch to a weekly view or see a timeline of occurrences for the last few weeks.

How to view Windows crash logs?

The steps to view the Windows crash logs are as follows.

1: Click on Windows Logs to examine Windows 10 crash logs, such as blue screen error logs.
2: Then, under Windows Logs, select System.
3: On the event list, look for Error and click it.
4: You may also make a custom display to make it easier to see the crash logs.
5: Select the period you’d like to see.
6: Select the By Log option from the drop-down menu.

Leave a Comment