How Long Does It Take a PS4 Controller to Charge?

Table of Contents

Understanding the Charging Time of PS4 Controllers:

In the world of gaming, the PlayStation 4 (PS4) stands out as one of the most famous gaming consoles, known for its immersive gaming experience and sleek layout. Central to this gaming experience is the PS4 controller, an important tool that allows players to interact with their favourite games. Like any other electronic device, the PS4 controller needs periodic charging to ensure uninterrupted gameplay. Nonetheless, the question often arises: How long does it take for a PS4 controller to charge? In this article, we will delve into aspects regarding how long does it take a PS4 Controller to charge. Also, we will explore different charging techniques, and deliver tips for improving charging efficiency.

Understanding the Charging Process:

Before delving into the specifics of charging time, it is crucial to comprehend the basics of the charging process for PS4 controllers. The PS4 controller comes with a built-in rechargeable battery that powers its functions wirelessly. When the battery level falls below a specific threshold, the controller needs to be recharged to continue working.

Factors Affecting Charging Time:

Several elements impact the charging time of PS4 controllers, including:

Battery Capacity: The battery capacity of the PS4 controller specifies how much charge it can keep up. Controllers with higher battery capabilities generally take longer to charge compared to those with lower capabilities.

Initial Battery Level: The initial battery level of the controller before charging also plays a role. Controllers with totally emptied batteries need more time to recharge compared to those with partially consumed batteries.

Charging Method: The technique used for charging the PS4 controller can enormously influence the charging time. Ordinary techniques include charging via a USB cable connected to the PS4 console, charging via a USB cable connected to a power adapter, and using third-party charging docks or stands.

Power Output of Charging Source: The power output of the charging source, such as the USB port or adapter used, can influence charging time. Higher power outputs generally result in faster charging times.

Battery Health: The overall health and condition of the controller’s battery can impact charging time. Over time, batteries may degrade, leading to extended charging times or decreased battery life.

Exploring Charging Methods:

Charging via USB Cable Connected to PS4 Console:

This is the most familiar technique for charging PS4 controllers.
You just need to connect one end of the USB cable to the controller and the other end to any available USB port on the PS4 console.
Charging time generally ranges from 2 to 4 hours, depending on factors such as battery level and the power output of the USB port.

Charging via USB Cable Connected to Power Adapter:

Alternatively, you can charge the PS4 controller by using a USB cable connected to a power adapter.
This technique may result in slightly faster charging times compared to charging via the PS4 console, particularly if the power adapter provides a higher power output.
Charging time sticks around within the 2 to 4-hour range, similar to charging via the console.

Third-Party Charging Docks or Stands:

Some third-party charging docks or stands deliver faster charging times and additional amenities.
These charging accessories usually feature higher power outputs or specialized charging technologies designed to optimize charging efficiency.
Charging times may vary depending on the specific product, but they normally provide comparable or faster charging times compared to conventional charging techniques.

How to Optimize Charging Efficiency?

To optimize the charging efficiency of PS4 controllers and decrease charging time, you need to consider the following tips:

Use High-Quality Charging Accessories: You need to invest in high-quality USB cables, power adapters, or third-party charging docks that deliver adequate power output for faster charging.
Avoid Overcharging: Avoid leaving the controller connected to the charger for extended periods once it is completely charged, as overcharging can potentially contaminate the battery over time.
Charge in a Cool Environment: Charging the controller in a cool, well-ventilated environment can prevent overheating, which can impact charging efficiency and battery health.
Monitor Battery Health: Keep an eye on the all-around health of the controller’s battery and consider replacing it if charging times become too long or battery life noticeably reduces.

Can You Fit A Bigger Battery In A PS4 Controller?

Have you seen how your PS4 controller battery depletes so quickly? Like, within three hours fast? And it is not merely a few controllers that are affected; all PS4 controllers have this problem. It seems Sony forgot to put a decent-sized battery in them.

So what can we do about it? After research, we have found that the internal batteries in PS4 controllers can be replaced.

However, on the downside, the process is a bit trickier and takes a bit of expertise to be performed. In addition, by replacing a normal battery, you might also negate your controller warranty.

Here is how you can do it:

Choosing The Correct Battery Pack

Here comes the technical part. The 3.7V lithium-polymer (LiPo) battery of the PS4 controller has a capability of 1000mAh. Many different battery packs, ranging from 1000mAh to 2000mAh, are available in the market. You can replace the original battery with any of the available ones.

Also, you need to take care to use the battery with the correct connector type. The 2015 PS4 and older models have distinct connector pins compared to the newer ones.

Just so that you can distinguish, 2015 and older models have a model number ending in ZCT1U. While the newer controllers have model numbers ending in ZCT2U.

Replacing The Battery

All you need to do now is open the controller and replace the pre-installed battery pack with the new one.

You need to open the screws on the back side of the controller and gently take the chassis apart.
You need to take care not to break anything, particularly the ribbon cable. Take it out and remove the battery connectors as well.
Now you need to detach the old battery and replace it with the new one. You need to make sure that you are inserting the battery connectors the right way.
Now you need to reassemble all the parts and reset the controller before turning it on and connecting it with your PS4.

You need to keep in mind that Sony did not intend to replace this battery yourself, so you will be repealing all of its warranty claims by using a bigger battery pack. To make sure that you are not at the losing end of this upgrade, replace the battery with a bigger one only when the earlier one has malfunctioned or stopped working completely.

Why Doesn’t the PS4 Controller Charge?

There are a lot of reasons for a PS4 controller not charging. Here are some of the facets that might be influencing the charge in your PS4 controller.

Faulty cable: You need to check the cable with another device that supports Micro USB. If that device also does not charge or the connection is unsteady, the cable is probably at fault.
Faulty power source: You need to connect another device to your power source. If the device does not charge but the cable is not charging, it could be the power source itself. If this occurs in your PS4’s USB ports, you may have to repair the console.
Faulty battery: The PS4’s battery has a finite lifespan, just like every other battery out there. While you can recharge the battery, it will ultimately fail, so it could just be that your PS4 is approaching the end of its life. Consider having a professional swap in a new battery.

How to Fix a PS4 Controller That Won’t Charge?

Check the charging cable connection

PS4 controllers charge via micro USB, which is a very low-profile connection that depends on small spring steel clips to hold the charger in place. If your controller does not start charging instantly, you need to carefully remove the micro USB connector from the port in the controller, and reinsert it. You need to make sure that the connector is completely seated and that it does not wobble around. If the micro USB connector feels loose or falls out, you probably have a worn-out cable. You need to check the little spring steel clips on the connector to see if they have been pushed in or worn down.

Try a different USB cable

As micro USB is so common, there is a good possibility you have more than one of these cables. If you have multiple cables on hand, you may try a few of them to check if your controller can charge. It is crucial to use a cable that is both competent at providing power and transmitting data. While all of the best micro USB cables can conduct both functions, some inexpensive cables can only do one or the other.

Plug your USB cable into something other than your PS4

In some cases, a PS4 controller will have complications charging from the PS4 USB ports. Instead of the PS4, you can use any high-quality USB charger or even a powered USB port on your computer or laptop. If your controller charges when plugged into a charger, your computer, or another device, there may be a problem with the USB ports on your PS4.

Inspect and clean the charging port on your controller

The connectors utilized by micro USB are so tiny that it is very easy to plug one in even if the port has dirt, dust, or other pollutants inside. In a worst-case scenario, the garbage can deter you from plugging the cable in all the way and correctly seating it. In other cases, dirty connections just deter power from transferring. You may use canned air or an electric blower to clear out the charging port and explore the inside with a flashlight. If you see any garbage or the controller still declines to charge, you can try to clean it further with a small tool like a toothpick.

Reset your PS4 controller

Your controller may have a firmware problem that is deterring it from charging. To fix that, you can insert a toothpick or other identical tool into the small hole on the back of your controller for about five seconds. After that, you need to plug the controller in, boot up your PS4, and see if the controller will take charge.

Power cycle your PS4

If you find that the controller still does not charge, power cycling the console may help you. To do this, you need to shut down the console and controller, unplug the console from power, and leave it unplugged for nearly 20 minutes.

Replace the PS4 controller charging port

If you find that the charging port is easygoing or damaged, the only way to fix this issue is to replace the port. This requires you to disperse the controller, unscrew the charging port board, and disconnect the ribbon cable that connects the charging port board to the main board. It is not extremely tough, but you will want to be completely confident that the charging port is at fault first to avoid wasting time and money.

Replace the PS4 controller battery

When all else goes wrong, there are only two options. Either the battery is bad, or the controller itself has shattered. You may want to send your controller in for repairs at this step or the earlier one, or you can just open the controller up and replace the battery.

While the PS4 does not use easily replaceable batteries like the Xbox One controller, replacing the battery is not that tough. All you need to do is take the controller apart, unplug the battery pack from the central circuit board, and replace it with a new battery.

Also Read: Which is Better PS4 Vs PS4 Pro?

Conclusion

The charging time of PS4 controllers normally ranges from 2 to 4 hours, depending on different factors such as battery capacity, charging technique, and the power output of the charging source. By understanding these factors and enforcing optimization methods, players can ensure efficient charging and longer battery life for uninterrupted gaming experiences. Whether charging via a USB cable connected to the console or using third-party charging accessories, maintaining the health of the controller’s battery is crucial for long-term gaming enjoyment.

FAQs

How Long Does It Take A Dead PS4 Controller To Charge?

Usually, the charging time of a controller relies on the current battery level and what you are charging it with. If the controller battery is dead and you are charging it with a 4W, or 5V charger or using the PS4 USB port, it will take approximately 2 hours to charge it completely. If you want to charge it even faster while using it, simply turn off the speaker and the vibration.

Can I Use a PS4 Controller While Charging?

Yes, you can use your PS4 controller while it is charging. Nonetheless, there are a few things to keep in mind if you are using your controller this way. You need to make sure that you are using the controller in an area where it can get sufficient ventilation. Placing the controller in a confined space while charging can overheat it, leading to sped-up battery devaluation. You should not leave your controller charging for too long – though Sony claims there are tools in place to evade overcharging, even slight overcharging of a Li-Ion battery leads to battery damage.

Should I let my PS4 controller die?

To answer the question shortly, we can say no. Contemporary batteries operate better if you keep them always topped up and charge them little and often rather than letting them die and charging them back to 100%. While letting your PS4 controller drop to 0% battery once or twice is not going to destroy the device, if you keep doing this then, you may notice that overall battery capacity reduces. You need to try to make sure that you are charging your PS4 controller as frequently as you can.